F4352012 Forest GreenMy Way 110x100 Forest Green
Designed by Piero Lissoni, 2016
Alimentation 110/240V intégrée. Pré-câblé avec câble sortant en néoprène de 120 mm et système de connexion sur câble IP67. Version dimmable sur demande.
221lm - 4000K - CRI> 80 - Beam° 50
Schéma technique
Caractéristiques générales
Schematic light drawing
Caractéristiques photométriques
Caractéristiques éléctriques
Caractéristiques physiques
We recommend using a connection system with a degree of protection greater than or equal to the degree of protection of the luminaire.
During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating.
Damages on the coating exposed to outdoor conditions or water, could cause corrosion.
Chemical substances affect the anticorrosion covering protection.
For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges
These effects are frequently caused by:
• over voltage coming from the mains’ network where fixture is connected.
• electrostatic discharge (ESD) coming from the environment.
The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.
Étiquetage en matière d’écoconception et d’énergie
Ce produit contient une source lumineuse de classe d’efficacité énergétique D
Source lumineuse (LED) devant être remplacée par une personne qualifiée
Replaceable control gear by a professional
