F1112U06GreyClimber Down - 87 Non Dimmable Grey
Designed by Piero Lissoni, 2016
Wall-mounted outdoor lamp emitting direct or bi-emission light. Die-cast aluminium body with asymmetrical optics and glare-control shutter. Micro-textured glass diffusers for uniform light distribution. High-resistance powder-coated finish treated for protection against UV rays and atmospheric agents. Integrated 110–240V power supply.
419lm - 3000K - CRI> 80 - Beam° 14
Technical Drawing
Main specifications
Schematic light drawing
Photometric
Electrical
Physical
We recommend using a connection system with a degree of protection greater than or equal to the degree of protection of the luminaire.
During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating.
Damages on the coating exposed to outdoor conditions or water, could cause corrosion.
Chemical substances affect the anticorrosion covering protection.
For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges
These effects are frequently caused by:
• over voltage coming from the mains’ network where fixture is connected.
• electrostatic discharge (ESD) coming from the environment.
The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.
